Steelhaven Skills Centre provides a range of training services to meet
the needs of the BlueScope Steel Limited Port Kembla operations. These
services include:
OHS and Trades training programs. OHS training includes the
BlueScope Steel General Safety Induction as well as a range of
WorkCover and other safety training courses.
Trades training includes full time off-the-job TAFE accredited
training for first and fourth year electrical and mechanical apprentices
as well as a range of short course options targeted at engineering
tradespeople.
Click on the links below for further information about specific courses.
|
OHS |
TRADES |
| BLUESCOPE STEEL
TRAINING
WORKCOVER TRAINING
CONFINED SPACES TRAINING
|
FULL TIME COURSES
- Certificate III in Electrotechnology - Systems Electrician
- Certificate III in Engineering - Mechanical Trade
ADVANCED APPRENTICE TRAINING (Electrical)
- AC & DC Fault Finding Techniques
- AC Squirrel Cage Motor Control
- Advanced PLCs
- DC Motors and Control
- Electrical Power System Isolate and Prove Dead
- Electromagnetic Brakes
- Sequencing PLCs
- Variable Speed AC/DC Drives
- Variable Speed DC Drive Converter
- Variable Speed DC Drive Regulator
- Variable Speed Drives AC Inverter
ELECTRICAL TRADES TRAINING
- Electrical Awareness
- Electrical Safety Refresher
- Electrical Verification Training
- Electromagnetic Brakes
- GEM 80 Programmable Logic Controller
- High Voltage Earthing Officer
- High Voltage Refresher
- High Voltage Recipient
- Switch Room Access
- Toshiba Leopack Converter
- Toshiba V Series PLC
MECHANICAL TRADES TRAINING
- Coupling Alignment
- Manual Metal Arc Welding
- Manual Thermal Cutting
- Manual Thermal Cutting for non trades
INSTRUMENTATION TRAINING
- Introduction to Instruments
|
For further information
about OHS training please contact.
Phone: 02 4275 3734
Fax: 02 4275 3732
Email:
steelhaven.training@ballarat.edu.au |
For further information
about Trades training please contact us.
Phone: 02 4275 3787
Fax: 02 4275 3732
Email:
steelhaven.training@ballarat.edu.au |
Top of Page
2008 OHS Training Calendar -
Scheduled Courses - July to Dec
(download the
OHS Training Calendar
- doc)
BlueScope Steel General
Safety Induction
Conducted every Tuesday and Thursday. To register for one or more
BlueScope Steel General Safety Induction modules, download an
application form and - fax to (02) 4275 3732 or - email to
steelhaven.training@ballarat.edu.au
Please note that anyone who is or will be working on site at
BlueScope Steel Port Kembla will need to have this training recorded in
their BlueScope Steel Passport. If you do not have a BlueScope Steel
Passport you will need to complete a
passport application, have it signed by your supervisor and bring it
with you on the day of the training. This
information sheet provides further details.
WorkCover Training
| Course Name |
Course Duration |
Course Fees
(GST Inclusive) |
Scheduled Course Dates |
|
OHS
Consultation Training (OHS Workplace
Committee/Representatives)
This course is designed for OHS Committee Members and OHS
Representatives. Participants will become familiar
with the knowledge and skills necessary to apply the
principals of workplace OHS consultation as an integral part
of an effective OHS Management System (OHSMS). The
course should also assist in the development of appropriate
attitudes so OHS Committee Members and OHS Representatives
may effectively carry out their functions under OHS
Legislation. |
4 Days |
$750 |
Jul – 7, 8, 14 &
15
Sep – 18, 19, 25 & 26
Nov – 12, 13, 19 & 20 |
|
General OHS
Induction for Construction Work in NSW
This course is aimed at all new workers carrying out
construction work, including: self-employed persons;
labourers; apprentices; trainees; trades-persons;
supervisors and project managers. |
6 Hours |
$150 |
Jul – 17
Aug – 14
Sep - 16 |
Oct – 15
Nov – 18
Dec - 15 |
|
Elevated Work
Platforms (Yellow Card)
This course aims to meet the needs of any employees who
may be responsible for, or who perform work with Boom,
Scissor or Vertical type Elevating Working Platforms where
the platform of boom units is less than 11 metres height or
reach. As scissors and vertical lifts do not alter a
centre of gravity, the 11 metre cut off does not apply.
Additional resources provided for national accreditation
(above 11 metres). |
1 Day |
$250 |
Jul – 17
Sep – 19
Nov - 12 |
|
Crane Bridge &
Gantry Cabin Control
This course aims to meet the needs of any employees who
may be responsible for, or who perform material movements
and transfer of loads using a Bridge and Gantry Crane. |
2 Days |
$450 |
Aug – 20 & 21
Oct – 15 & 16
Dec – 10 & 11 |
|
Forklift
Operation (L.F.)
This course aims to meet the needs of any employees who
may be responsible for, or who perform work with Forklift
Trucks. |
2 Days |
$450 |
Aug – 11 & 12
Oct – 1 & 2
Dec – 11 & 12 |
|
Dogging
This course aims to meet the needs of any employees who
may be responsible for, or who perform Dogging work with
loads handles by power cranes. |
5 Days |
$990 |
Jul 16, 23, 30,
Aug 6, 13
Aug 19, 26, Sep 2, 9, 16
Aug 20, 27, Sep 3, 10, 17
Sep 25, Oct 2, 9, 16, 23
Oct 7, 14, 22, 28, Nov 4 |
|
Rigging
This course aims to meet the needs of any employees who
perform rigging work with loads handled by power cranes or
in the erection of structural steelwork. Pre-requisite:
Dogging |
4 Days |
$900 |
Aug 29, Sep 5, 11,
18
Nov 5, 13, 20, 27 |
|
Skid Steer
Loader
This course aims to meet the needs of any employees who
may be responsible for, or who perform work with Front End
Loaders of the Skid Steer type. |
2 Days |
$450 |
Nov – 12 & 13 |
Additional
WorkCover Training Available
(Training Dates Scheduled upon Demand) |
- OHS Risk Management for Supervisors & Managers
|
Top of
Page
Confined Spaces Training
| Course Name |
Course Duration |
Course Fees
(GST Inclusive) |
Scheduled Course Dates |
| Confined Space Awareness
Training
It is intended that the above training be provided to
meet the needs of any employees who perform work in or on
confined spaces. |
Half Day |
$110 |
Jul – 8, 30
Aug – 13, 28
Sep – 11, 24, |
Oct – 16, 30
Nov – 13, 24
Dec – 11, 18 |
| 3 Day Standby
Person
Training (Safe Working in a Confined Space)
This course is designed for Employees who may be
responsible for, or who perform work in confined spaces.
The aim of this course is to train participants in the
requirements of the NSW OH&S Regulations 2001 (Safe Working
in a Confined Space) to enable them to work safely in
confined spaces as recognised competent persons. |
3 Days |
$650 |
Jul – 1, 2 & 3
Jul – 14, 15 & 16
Aug – 5, 6 & 7
Aug – 18, 19 & 20
Sep – 8, 9 & 10
Sep –22, 23 & 24 |
Oct – 7, 8 & 9
Oct – 21,22 & 23
Nov – 4, 5 & 6
Nov – 17,18 & 19
Dec – 2, 3 & 4
Dec – 15,16 & 17 |
| Standby
Person Re
Assessment Training
This course is designed for any employee who has been
previously trained to competent person standard and who may
work, or is working in confined spaces. The aim of
this course is to refresh previously trained persons in the
requirements of the NSW OH&S Regulations 2001 (Safe Working
in a Confined Space) to ensure their skills are maintained. |
1 Day |
$250 |
Jul – 1, 17, 21
Aug – 5, 14, 21
Sep – 3, 15, 25 |
Oct – 16, 21, 31
Nov – 14, 27
Dec – 9, 17 |
Additional OHS Training
Available
(Training Dates Scheduled upon Demand) |
- OHS Consultation Refresher Training
- OHS Committee Chairperson Workshop
- Employee OHS Awareness Training
|
Top of
Page
BlueScope Steel Training
| Course Name |
Course Duration |
Course Fees (GST
Inclusive) |
Scheduled Course Dates |
|
Authority to Work Training
(ATW)
This course details the ATW System on the BlueScope Steel
Site, the responsibilities associated with the ATW System,
and the procedures to be followed in its application. |
Half Day |
$110 |
Jul – 8, 24
Aug – 11, 25
Sep – 15, 29 |
Oct – 7, 23
Nov – 10, 24
Dec - 11 |
|
Isolation Locks 2 Training
This course details the requirements of the BlueScope
Steel Plant & Equipment Isolation Principles and Practices. |
Half Day |
$110 |
Jul – 10, 28
Aug – 21
Sep – 2, 18 |
Oct – 21
Nov – 17, 27
Dec - 8 |
|
Crane Bridge & Gantry Remote Control
This course aims to meet the needs of any employees who
may be responsible for, or who perform material movements
and transfer of loads using a Pendant or Remote operation
Bridge and Gantry crane. |
1 Day |
$215 |
Jul – 14
Aug – 14
Sep - 23 |
Oct – 21
Nov – 18
Dec - 16 |
|
Additional BlueScope Steel Training
Available
(Training dates scheduled upon demand) |
Authority to Work Refresher
Training
BSL Safety Refresher Training Day
Certificate IV in Training
Certificate IV in Assessment |
Confined Space Awareness for
Managers & Supervisors
Forklift Refresher Training
Gas Watcher & Gas Awareness |
Isolation Locks Refresher
Training
Job Safety Management for Supervisors
Self Contained Breathing Apparatus
Incident Investigation Training |
Top of
Page
BlueScope Steel General Safety Induction Day
| Modules |
Full Day Induction – 4 Modules |
Duration |
Course Fees
(GST Inclusive) |
| 1 |
General Induction Level I
(General Safety Induction) |
For ALL BlueScope Steel
Employees & Contractors |
7.30am – 10.00am
(2 ½ Hours) |
$80 |
| 2 |
Road & Rail Induction |
For ANY person required
to drive a vehicle on the BlueScope Steel Site |
10.15am – 11.45am
(1½ Hours) |
$60 |
| 3 |
General Induction Level II
(Safety Systems: ATW & JSEA, Working at Heights & Below) |
For ANY BlueScope Steel
Employee or Contractor performing operational or maintenance
work |
12.15pm – 1.45pm
(1½ Hours) |
$50 |
| 4 |
Isolation Locks 1 |
For ANY BlueScope Steel
Employee or Contractor working under isolation |
2.00pm – 4.00pm
(2 Hours) |
$50 |
|
All course materials are provided for the
training. Lunch is only provided for participants
attending both morning & afternoon modules. |
The BlueScope Steel General Safety Induction
Day is conducted every Tuesday and Thursday
(excluding Public Holidays).
Additional courses are scheduled as required. Please contact our
office on 4275 3734 for further information & induction
enrolments.
| July |
1, 3, 8, 10, 15, 17, 22, 24, 29, 31 |
October |
2, 7, 9, 14, 16, 21, 23, 28, 30 |
| August |
5, 7, 12, 14, 19, 21, 26, 28 |
November |
4, 6, 11, 13, 18, 20, 25, 27 |
| September |
2, 4 , 9, 11, 16, 18, 23, 25, 30 |
December |
2, 4, 9, 11, 16, 18, 23 |
The following
charges apply for BlueScope Steel Passports
|
| New Passport – |
trained by trainers external to Steelhaven
Skills Centre |
$20.00 |
| Replacement Passport – |
lost or destroyed |
$50.00 |
| Replacement Passport – |
full/complete book or work worn (old
passport sighted as evidence) |
$20.00 |
| Replacement Registration Number – |
only given when induction is valid
(application required) |
$00.00 |
Top of
Page
|
